ENGLISH
Instruction manual ELEKTRONIKA PROFI
30
Problem Possible Cause Trouble shooting
The orange control lamp is switched
off: there is not enough water in the
water tank.
Refill water.
Water was refilled, the orange
control lamp is switched off.
Switch on/off the machine.
The machine is switched on, but the
machine does not go into service.
The water tank is not fixed properly. Fix the water tank properly.
Different quantities of coffee.
Different grinding degree
Irregular tamping
Different doses when preparing 1
espresso, 2 espresso etc.
Different types of coffee.
Make sure to maintain the same
parameters.
If the machine has not been used for a longer period of time, it is recommended to
.. clean the group (see instructions, page 25); After this, please do not clamp the filter holder back to the group.
.. empty the boiler.
1 Switch the machine off (power switch in lower position) and open the hot water dispenser. Due to the boiler
pressure, the boiler water is now discharged by the hot water dispenser.
2 Close the hot water lever again after emptying the boiler.
To restart the machine, see chapter “First use”.
How to froth milk like a “barista”
1 If possible, use cold and fresh milk with a fat content of approx. 1.5 % or 3 %. Even UHT-milk is suitable, if
preferred.
2 Use a milk jug (made of metal) with a minimum volume of 0.5 litres. The size of the container should not be too
large. A small and high container is perfect.
3 Open the steam valve for approx. 5 seconds to release the condensation water and to create dry steam.
4 Fill 1/3 of the jug with milk and place it under the steam nozzle. The nozzle should be immersed in the middle of
the milk jug.
5 Slowly open the steam lever. The steam pervades the milk.
6 Keep the milk jug still.
7 After a few seconds, you will notice a light suction in the milk jug. The proper frothing begins. Move the milk jug
downwards while the milk level increases. The steam nozzle must be kept under the surface of the frothing milk.
Milk proteins “froth” with a temperature up to 77°C.
If this temperature is exceeded, the milk does not froth anymore.
8 When the desired amount of milk froth is reached, immerse the entire steam nozzle in the milk jug and close the
steam lever.
When the milk frothing is finished, just agitate the milk jug a little bit in order make the milk
bubbles ascend to the surface and to get a compact milk froth.
9 If there is some milk left in the milk jug, let it cool down; it can be re-used later.
10 After frothing the milk, release the steam into the drip tray to avoid the steam nozzle to be blocked.
12 RECOMMENDED ACCESSORIES
Blind filter for group cleaning (included in delivery)
Detergent for group cleaning with blind filter (available at your specialised dealer)
Descaler powder for regular prophylactic descaling of the machine (available at your specialised dealer)
For a perfect coffee-result a good espresso coffee machine and coffee grinder are as important as a good coffee. Our
professional espresso coffee machines and grinders are the best basis to achieve this result.
The coffee basement perfectly complements your espresso coffee machine and your grinder.
(69 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern